Product ID:METACERAM 21021
MSDS Date:11/12/1991
FSC:3439
NIIN:01-191-5053
MSDS Number: BWMSF

EUTECTIC CORP

40-40 172ND STREET
FLUSHING, NY 11358-9981
US

Emergency Phone: 718-358-4000

Info Phone: 718-445-1784

Cage: 72271

SUNOX INC

10789 CHARLESTON, SC 29411 US

Telephone: 803-554-6261

Cage: 7W767

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: > 50%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9394

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 5-10%

OSHA PEL 15 MG/M3 DUST

ACGIH TLV: 10 MG/M3 DUST; 9394

MOLYBDENUM (INSOLUBLE COMPOUNDS)

CAS: 7439-98-7

RTECS: QA4680000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9394

LD50 LC50 Mixture:TLV 5 MG/M3 FOR WELDING FUMES
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:LUNG DAMAGE, DIZZINESS, NAUSEA,
DRYNESS/ IRRITATION OF NOSE/THROAT/EYES, BRONCHIAL ASTHMA, LUNG
FIBROSIS, PNEUMOCONIOSIS, SIDEROSIS, METAL FUME FEVER, WEIGHT LOSS,
DIGESTIVE DISTURBANCES, TIGHTNESS IN CHEST, ALLERGIC REACTION,
KIDNEY/LIVERDAMAGE.
Explanation of Carcinogenicity:NICKEL, ITS PROCESSING OR SOME OF ITS
COMPOUNDS ARE LISTED BY NTP & IARC. SEE INDIVIDUAL REPORTS FOR
DETAILS.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PRE-EXISITING RESPIRATORY
CONDITIONS MAY BE AGGRAVATED BY EXPOSURE.

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
WARM AND QUIET. GET MEDICAL ATTENTION. SKIN: WASH AFFECTED AREA
THOROUGHLY WITH SOAP AND WATER. IF IRRITATION PERSISTS, GET MEDICAL
ATTENTION. EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR 15 MINUTES.
GET MEDICAL ATTENTION. INGESTION: CALL A PHYSICIAN AND/OR LOCAL
POISON CONTROL CENTER. ADVISE OF INGREDIENTS.

Flash Point:NON-FLAMMABLE
Extinguishing Media:NON-FLAMMABLE. USE MEDIA SUITABLE FOR SURROUNDING
FIRE.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE.
Unusual Fire/Explosion Hazard:METAL POWDER DUST MAY PRESENT A FIRE OR
EXPLOSION HAZARD UNDER FAVORABLE CONDITIONS OF PARTICLE SIZE,
DISPERSION AND STRONG IGNITION SOURCE.

Spill Release Procedures:COLLECT AND HOLD FOR DISPOSAL. AVOID CREATING
DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AWAY FROM STRONG OXIDIZING
AGENTS AND SOURCES OF IGNITION.
Other Precautions:TRAIN WORKERS NOT TO TOUCH LIVE ELECTRICAL PARTS AND
TO INSULATE THEMSELVES FORM WORK AND ELECTRICAL GROUND.

Respiratory Protection:IF VENTILATION DOES NOT MAINTAIN INHALATION
EXOSURES BELOW PEL (TLV), USE NIOSH/MSHA APPROVED RESPIRATOR AS PER
CURRENT 29 CFR 1910.134, INSTRUCTIONS/WARNINGS AND NIOSH RESPIRATOR
SELECTION.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION TO
MAINTAIN EXPOSURE LEVELS.
Protective Gloves:WELDER'S GLOVES
Eye Protection:HELMET OR FACE SHIELD WITH FILTER LENS
Other Protective Equipment:PROVIDE PROTECTIVE SCREENS AND FLASH GOGGLES
IF NECESSARY. WEAR HAND, HEAD AND BODY COVERING WHICH HELP PREVENT
INJURY.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
FUMES, GASES AND DUSTS GIVEN OFF DURING HEATING, WELDING, BRAZING,
SOLDERING, CUTTING OR THERMAL SPRAY PROCESSES CANNOT BE CLASSIFIED
SIMPLY. THE COMPOSITION AND QUANTITY OF THESE ARE DEPENDENT UPON T
HE METAL BEING WELDED, THE PROCESS, PROCEDURES AND ELECTRODES OR
OTHER CONSUMABLES USED.

HCC:N1
NRC/State Lic Num:NONE
Solubility in Water:INSOLUBLE
Appearance and Odor:POWDER
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES MAY BE PRODUCED

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.